What is main difference between Digital and Analog LED strips?
- Category: Tron Dance Shows
- Published: 22 October 2017
- Written by Richard Scherer - Jaroslav Rais
- Hits: 3007
|Colors||only one||different for each LED|
|Controls on hardware level||DMX||SPI|
|Typical user control||DMX console or software||video software, live video stream, Art-Net, SD-card|
|Voltage||12V, 24V, 220V||5V|
|Typical number of LEDs per meter||32, 60, 80||30, 32, 42, 60, up to 144|
|Cut segment||3 or 6 LEDs||1 LED|
|Typical usage||decorative lightning||decorative lightning with video projection|
|Typical current per meter of strip||1A at 12V, 0.5A at 24V||1.2A at 5V|
|Can be controlled using LED Strip Studio||yes (additional LED DMX dimmers are required)||yes
Analog LED strips
Way of control Analog LED Strips
Analog strips are frequently controlled over DMX or using remote controls. In case you use single color analog LED strips (usually white), you are able to connect them directly into the power source.
Most common way of controlling analog LED strips is over DMX signal. This allows you to change color of the strips (each part on the suits - 16 parts in total), using standard DMX lightning console (or software).
Picture 1 Tron Dace Suit, made from 16 different parts, where each part can change color separately